Mellanox ConnectX4 Firmware
Links
Packages
- IBM P/N 00WT010: 1-Port CX4 EDR Adapter
- IBM P/N 00WT039: 2-Port CX4 EDR Adapter
Prerequisites
Command
flint --device <MST Device> --image <Image File> { burn | query
Firmware Upgrade
- Identify Existing MST Devices (/dev/mst/):
[root@host ~]# mst status -v
MST modules:
------------
MST PCI module is not loaded
MST PCI configuration module loaded
PCI devices:
------------
DEVICE_TYPE MST PCI RDMA NET NUMA
ConnectX4(rev:0) /dev/mst/mt4115_pciconf0.1 0004:01:00.1 mlx5_1 net-ib1 1
.
ConnectX4(rev:0) /dev/mst/mt4115_pciconf0 0004:01:00.0 mlx5_0 net-ib0 1
.
- Launch Firmware Upgrade:
[root@host ~]# flint --device /dev/mst/mt4115_pciconf0 --image fw-ConnectX4-rel-12_17_2010-00WT039_Ax.bin burn
Current FW version on flash: 12.16.1006
New FW version: 12.17.2010
-E- PSID mismatch. The PSID on flash (MT_2150110033) differs from the PSID in the given image (IBM2150110033).
Note if you get PSID mismatch error, please contact IODev
Current FW version on flash: 12.16.1006
New FW version: 12.17.2010
.
Do you want to continue ? (y/n) [n] : y
Burning FS3 FW image without signatures - OK
Restoring signature - OK
-I- To load new FW run mlxfwreset or reboot machine.
- Manually Reboot System
Note: mlxfwreset does not currently work on Power systems
Firmware Query
[root@host: ~]# flint --device /dev/mst/mt4115_pciconf0 query
Image type: FS3
FW Version: 12.17.2010
FW Release Date: 2.11.2016
Product Version: rel-12_17_2010
Description: UID GuidsNumber
Base GUID: 7cfe900300814cf0 4
Base MAC: 00007cfe90814cf0 4
Image VSD:
Device VSD:
PSID: IBM2190110032